Layer

Layer

Layer (aka overlay, blend, merge) two clips of possibly different sizes, but with the same color format.

For pixel-wise transparency information, the alpha channel of an RGBA overlay_clip is used as a mask.
Layer( clip base_clip, clip overlay_clip [, string op, int level, int x, int y, int threshold, bool use_chroma ] )

clip  base_clip =

The underlying clip, which determines the size and all other video and audio properties of the result.

Color format must be YUY2 or RGB32.

AVS+ also supports RGB64.

clip  overlay_clip =

The clip which is merged onto clip. If RGB32, the alpha channel is used as a mask.

Color format must match base_clip.

string  op = "add"

The merge operation to be performed, which can be one of the following:

Op	Example	Description
add		This is the default mode. Equivalent to Overlay(mode="blend"). overlay_clip will be copied on top of the original, in proportion to level, and subject to the alpha channel. The difference between base_clip and overlay_clip is multiplied with alpha and added to base_clip. alpha=0d    → only base_clip visible alpha=128d → base_clip and overlay_clip equally blended alpha=255d → only overlay_clip visible Formula used : RGB:   YUY2:
subtract		base_clip minus overlay_clip. The same as add, but overlay_clip is inverted before adding. If both clips are equal and level=128, a flat gray field is returned; compare to Subtract.
lighten		Copy overlay_clip over base_clip in areas where overlay_clip is lighter by threshold. Performs the same operation as add, but only when overlay_clip is BRIGHTER than base_clip. use_chroma must be true. Also known as lighter color.
darken		Copy overlay_clip over base_clip in areas where overlay_clip is darker by threshold. The same as "lighten", but it is performed only when overlay_clip is DARKER than base_clip. use_chroma must be true. Also known as darker color.
mul		base_clip multiplied by overlay_clip. This will generally make the output darker. alpha=0d    → only base_clip visible. alpha=255d → approx. the same luminance as base_clip but with the colors of overlay_clip. See GIMP: Multiply
fast		Like add, but without masking. use_chroma must be true; level and threshold are not used. The result is simply the average of base_clip and overlay_clip.

int  level = (maximum)

The strength of the performed operation:

• 0 – no effect: base_clip is returned unchanged
• 257 (256 for YUY2) – maximum strength

AVS+ autoscaled – works without changes at all bit depths.

int  x = 0

int  y = 0

offset position of overlay_clip

int  threshold = 0

Changes the transition point of op = "darken", "lighten."

bool  use_chroma = true

Use chroma of the overlay_clip. Default=true. When false, only luma is used.

Must be true for op = "darken", "lighten", "add."

Audio, FrameRate and FrameCount are taken from the first clip.

There are some differences in the behaviour and the allowed parameter depending on the color format and the operation; here are the details:

• There is no mask (alpha channel) in YUY2, so the alpha channel is assumed to be fully opaque (255_d) everywhere.

• In RGB32 the overlay_clip alpha channel is multiplied with level, so the resulting alpha is

(alpha * level + 1) / 256.

This means for full strength of operation, alpha has to be 255_d and level has to be 257.

Examples

• Layer can be used to combine two captures of different broadcasts for reducing noise. A discussion of this idea can be found here. Of course you have to ensure that the frames of the two clips match exactly -- use Trim or DeleteFrame as necessary. A sample script:

clip1 = AviSource("capture-pass-1.avi").ConvertToYUY2
clip2 = AviSource("capture-pass-2.avi").ConvertToYUY2.Trim(101, 0)
return Layer(clip1, clip2, "fast")

Mask

Applies a defined alpha-mask to a clip, by converting RGB32-only mask_clip to greyscale and copying that greyscale information to the alpha channel of RGB32-only clip. In the alpha channel, "black" means transparent and "white" means opaque. For those of you who familiar with Photoshop masks, the concept is the same. In fact you can create a black and white photo in Photoshop, load it in your script and use it as a mask.

Mask(clip clip, clip mask_clip)

clip  clip =

The base clip, which determines the size and all other video and audio properties of the result.

Color format must be RGB32.

AVS+ also supports RGB64 and PlanarRGBA.

clip  mask_clip =

Alpha-mask source, as described above. Size and color format must match clip.

Examples

Suppose "ss.jpg" is a snapshot from a video clip, which served as a guideline to create the mask using Paint. We use ImageSource to load the image in the script and Mask to apply it.

bg  = AviSource("01gray.avi").ConvertToRGB32      # here is the background clip
mk  = ImageSource("ss.jpg").ConvertToRGB32        # load the image
top = AviSource("k3.avi").ConvertToRGB32.Mask(mk) # load the top layer clip and apply the mask to it
Layer(bg, top)                                    # layer the background and the top layer with mask

ResetMask

Applies an opaque (white) alpha channel to a clip. The alpha channel of an RGB32 clip is not always well-defined, depending on the source (it may contain random data); this filter is a fast way to apply an all-white mask.

ResetMask(clip clip)

ResetMask(clip clip, float mask) AVS+

clip  clip =

Source clip. Alpha channel will be set to opaque. Color format must be RGB32.

AVS+ also supports RGB64, PlanarRGBA and YUVA.

mask  float =

AVS+ Optional mask value to set. No bit-depth scaling occurs, but value is clipped to be between 0 and maximum_pixel_value.

Maximum opacity is 1.0 for 32 bit float formats, and (1^bit_depth) - 1 for 8-16 bit formats

ColorKeyMask

Clears pixels in the alpha channel by comparing to a transparent color (default black).

Each pixel with a color differing less than (tolB,tolR,tolG) (default 10_d) is set to transparent (black); otherwise it is left unchanged – note, it is NOT set to opaque (white). That's why you might need ResetMask before applying this filter. This behaviour allows an aggregate mask to be constructed with multiple calls to ColorKeyMask.

When tolR or tolG are not set, they get the value of tolB by default. Normally you start with a ResetMask, then chain a few calls to ColorKeyMask to cause transparent holes where each color of interest occurs. See Overlay for examples.

ColorKeyMask(clip clip, int color [, int tolB, int tolG, int tolR])

clip  clip =

Source clip. Color format must be RGB32.

AVS+ also supports RGB64 and PlanarRGBA.

int  color = black

Transparent color. Default black.

int  tolB = 10_d

int  tolG = (tolB)

int  tolR = (tolB)

Color tolerance. See description above.

Changelog

v2.58

ColorKeyMask: Added separate tolerance levels.