Dfttest

Revision as of 21:19, 9 September 2015

Abstract
Author	tritical, cretindesalpes
Version	v1.9.4
Download	dfttest-1.9.4.zip
Category	Spatio-Temporal Denoisers
License	GPLv2
Discussion	Doom9 Thread, Update

Description

2D/3D frequency domain denoiser.

Requirements

AviSynth 2.5.8 or 2.6.0 or greater

Supported color formats: YUY2, YV12, *YV16, *YV24

* These additional planar colorspaces are not available in AviSynth 2.5.8.

FFTW 3.3.4 (fftw-3.3.4-dll32.zip)

*** 32-bit libfftw3f-3.dll needs to be in the search path (C:\Windows\SysWOW64 64-bit OS or C:\windows\system32 32-bit OS)

*** dfttest will not run or load without it.

Quick start

Denoising an 8-bit source

Default options - moderate denoising (sigma) with moderate temporal filtering (tbsize):

dfttest(sigma=16, tbsize=5)

Light denoising with less temporal filtering:

dfttest(sigma=6, tbsize=3)

Light denoising with no temporal filtering:

dfttest(sigma=6, tbsize=1)

sigma can be anywhere from 1.0 to 256.0 and beyond; denoising "strength" seems proportional to the square root of sigma.
tbsize (temporal filter range) must be an odd number: 1, 3, 5, 7 ...etc

Denoising a high bit depth source

dfttest can accept a high bit depth (Stack16) source and return either 16bit (lsb=true) or 8bit (lsb=false).

Strong denoising with no temporal filtering; convert output to 8bit

dfttest(sigma=64, tbsize=1, lsb_in=true, lsb=false)

Same as above, but adding dither:

dfttest(sigma=16, tbsize=3, lsb_in=true, lsb=false, dither=1)

dither=1 should combat any banding introduced by dfttest's quantization, but probably won't help banding in the source.
dither=2 or higher adds random noise to combat banding in the source.

Syntax and Parameters

Syntax:

dfttest(bool Y, bool U, bool V, int ftype, float sigma, float sigma2, float pmin,
float pmax, int sbsize, int smode, int sosize, int tbsize, int tmode,
int tosize, int swin, int twin, float sbeta, float tbeta, bool zmean,
string sfile, string sfile2, string pminfile, string pmaxfile, float f0beta,
string nfile, int threads, int opt, string nstring, string sstring,
string ssx, string ssy, string sst, int dither, bool lsb, bool lsb_in,
bool quiet)

---------------------------------------------------------------------------------------------------

Parameters:

Y,U,V -

If true, the corresponding plane is processed. Otherwise, it is copied through
to the output image as is.

default: true,true,true

ftype -

Controls the filter type. Possible settings are:

0 - generalized wiener filter

mult = max((psd-sigma)/psd,0)^f0beta

1 - hard threshold

mult = psd < sigma ? 0.0 : 1.0;

2 - multiplier

mult = sigma

3 - multiplier switched based on psd value

mult = (psd >= pmin && psd <= pmax) ? sigma : sigma2

4 - multiplier modified based on psd value and range

mult = sigma*sqrt((psd*pmax)/((psd+pmin)*(psd+pmax)))

The real and imaginary parts of each complex dft coefficient are multiplied
by the corresponding 'mult' value.

** psd = magnitude squared = real*real + imag*imag

default: 0

sigma,sigma2 -

Value of sigma and sigma2 (used as described in ftype parameter description).
If using the sfile or sstring parameter then the sigma parameter is ignored.
If using the sfile2 parameter then the sigma2 parameter is ignored.

NOTE: Starting in v1.5, these values are normalized based on the
non-coherent power gain of the window when ftype<2. That
is to say that for ftype<2, where sigma/sigma2 correspond
to power, they are now independent of the window size and
windowing function used, and that they directly correspond
to power. For convenience, the normalization factor is output
using OutputDebugString() when the filter loads. To convert
between old and new sigma values, simply multiply the pre v1.5
sigma value by the scaling factor. This scaling is also
applied to values loaded from sfile/sfile2 files.

default: 16.0,16.0

pmin,pmax -

Used as described in the ftype parameter description. If using the pminfile
parameter then the pmin parameter is ignored. If using the pmaxfile parameter
then the pmax parameter is ignored.

NOTE: Starting in v1.5, these values are normalized based on the
non-coherent power gain of the window. They are now independent
of the window size and windowing function used, and directly
correspond to power. For convenience, the normalization factor
is output using OutputDebugString() when the filter loads. To
convert between old and new pmin/pmax values, simply multiply
the pre v1.5 values by the scaling factor. This scaling is
also applied to values loaded from pmin/pmax files.

default: 0.0,500.0

sbsize -

Sets the length of the sides of the spatial window. Must be 1 or greater.
Must be odd if using smode = 0.

default: 12

smode -

Sets the mode for spatial operation. There are two possible settings:

0 - process every pixel independently... center the spatial window
on the current pixel, filter, move to the next pixel, repeat.
Spatial overlapping 'sosize' not used.

1 - process the spatial dimension in blocks of sbsize. Spatial
overlapping 'sosize' used.

default: 1

sosize -

Sets the spatial overlap amount. Must be in the range 0 to sbsize-1 (inclusive).
If sosize is greater than sbsize>>1, then sbsize%(sbsize-sosize) must equal 0.
In other words, overlap greater than 50% requires that sbsize-sosize be a divisor
of sbsize.

default: 9

tbsize -

Sets the length of the temporal dimension (i.e. number of frames). Must be at
least 1. Must be odd if using tmode = 0.

default: 5

tmode -

Sets the mode for temporal operation. There are two possible settings:

0 - process every frame independently... center the temporal window
on the current frame, filter, move to the next frame, repeat.
Temporal overlapping 'tosize' not used.

1 - process the temporal dimension in blocks of tbsize. Temporal
overlapping 'tosize' used.

default: 0

tosize -

Sets the temporal overlap amount. Must be in the range 0 to tbsize-1 (inclusive).
If tosize is greater than tbsize>>1, then tbsize%(tbsize-tosize) must equal 0.
In other words, overlap greater than 50% requires that tbsize-tosize be a divisor
of tbsize.

default: 0

swin,twin -

Sets the type of analysis/synthesis window to be used for spatial (swin) and
temporal (twin) processing. Possible settings:

0: hanning
1: hamming
2: blackman
3: 4 term blackman-harris
4: kaiser-bessel
5: 7 term blackman-harris
6: flat top
7: rectangular
8: Bartlett
9: Bartlett-Hann
10: Nuttall
11: Blackman-Nuttall

default: 0,7

sbeta,tbeta -

Sets the beta value for kaiser-bessel window type. sbeta goes with swin,
tbeta goes with twin. Not used unless the corresponding window value
is set to 4.

default: 2.5,2.5

zmean -

Controls whether the window mean is subtracted out (zero'd) prior to
filtering in the frequency domain.

default: true

sfile -

Specifies an input file listing sigma values for each dft coefficient.
There can be multiple lines with multiple coefficients per line.
Separate coefficients on the same line using ',' or ' '. Placing a
'#' at the beginning of a line will cause that line to be ignored. The
coefficients are read from the file in left to right, top to bottom order.

The dft transform results in tbsize*sbsize*((sbsize>>1)+1) coefficients.
You must give these many sigma values in the sfile. Assuming 2D (tbsize=1),
and sbsize=8 (i.e. 8x8 window). The resulting dft transform has 40
coefficients organized as follows:

0 1 2 3 4
5 6 7 8 9
10 11 12 13 14
15 16 17 18 19
20 21 22 23 24
25 26 27 28 29
30 31 32 33 34
35 36 37 38 39

The number given here specifies which sigma value from the sfile
corresponds to that dft coefficient.

The DC coefficient is in the upper left. The top row corresponds to
purely horizontal frequencies, and the frequencies increase from left to
right. In this example '4' corresponds to the highest horizontal frequency.

The left-most column corresponds to purely vertical frequencies, but the
highest frequency is at the (sbsize>>1) row (assuming the numbering starts
at 0)... in this case '20' corresponds to the highest vertical frequency.
The frequencies then decrease from (sbsize>>1) to sbsize-1. Basically,
the first (sbsize>>1) rows correspond to the positive frequencies and
the last (sbsize>>1)-1 rows correspond to the negative frequencies.

In the 8x8 case, the single highest frequency is located at '24'.

In the case that tbsize > 1, the first set of ((sbsize>>1)+1)*sbsize
cofficients correspond to the lowest frequencies temporally (with the
relations described for the 2D case holding within that set) and the
frequencies increase temporally from set to set up to the tbsize>>1 set.
The frequencies then decrease from there to the tbsize-1 set (again
the positive vs negative frequencies as mentioned previously). If tbsize=3,
you get 120 coefficients:

0 1 2 3 4
5 6 7 8 9
10 11 12 13 14
15 16 17 18 19
20 21 22 23 24
25 26 27 28 29
30 31 32 33 34
35 36 37 38 39

40 41 42 43 44
45 46 47 48 49
50 51 52 53 54
55 56 57 58 59
60 61 62 63 64
65 66 67 68 69
70 71 72 73 74
75 76 77 78 79

80 81 82 83 84
85 86 87 88 89
90 91 92 93 94
95 96 97 98 99
100 101 102 103 104
105 106 107 108 109
110 111 112 113 114
115 116 117 118 119

The DC coefficient is still at '0'. The highest purely temporal frequency is
at '40'. The highest overall frequency is at '64'.

default: ""

sfile2,pminfile,pmaxfile -

Can be used to give different values of sigma2, pmin, and pmax for each
dft coefficient respectively. Entry and format is exactly the same as
described in the sfile parameter description. If sfile2 is not given then
the value of sigma2 is used for every dft coefficient. If pminfile is
not given then the value of pmin is used for every dft coefficient. If
pmaxfile is not given then the value of pmax is used for every dft coefficient.

default: "","",""

f0beta -

Power term in ftype=0. The ftype=0 formula is:

max((psd-sigma)/psd,0)^f0beta

For f0beta=1, this equation corresponds to the wiener filter with
spectral subtraction as the estimate of the signal power. For f0beta=0.5,
the equation corresponds to spectral subtraction. The 1.0 and 0.5 cases
are separated from the general routine in the code to allow for fast
operation. Other values will result in the general routine being used,
which has to perform a pow() computation, and is therefore much slower.

default: 1.0

nfile -

When ftype<2, a nfile can be used to specify block locations in the video
from which dfttest will estimate the noise power spectrum (sigma) to
be used for filtering.

When the noise to be removed is not white (i.e. doesn't have a flat power
spectrum), specifying only a single sigma value is not adequate. Prior
to v1.5, using dfftest in such cases meant you would have to figure out the
noise spectrum on your own, and then use an sfile to input the sigma values.
Now dfttest can perform the task of estimating the noise spectrum.

The nfile should list locations in the video that consist of noise on
a flat background, one entry per line. The line syntax is:

frame_number,plane,ypos,xpos e.g. 0,0,20,20

plane: (0=Y,1=U,2=V)
ypos/xpos: the upper left position of the block
(0,0 is the upper left of the frame)

dfttest positions a window (of the type defined by sbsize/tbsize/swin/twin)
at the specified location, and estimates the power using fft magnitude^2.
When tbsize>1, frame_number specifies the first frame of the temporal block.
Make sure that the window size is large enough to capture the full noise
pattern.

If you list multiple blocks (multiple lines in the nfile), then the
estimates obtained at each block are averaged to form the final estimate.
Having more block locations to use lowers the variance of the estimate.
The more block locations you specify the closer the true noise spectrum
will be estimated, resulting in better denoising. When listing multiple
block locations, it is best/preferred if the locations do not overlap.

Typically, subtracting out the noise power spectrum is not adequate becase
it is only the average. In any one block the noise spectrum has the potential
to exceed the average in a frequency bin. Therefore, one typically over
subtracts based on some multiple of the noise spectrum (usually in the range
of 3-8). The default used in dfttest is 5 if ftype=0 and 7 if ftype=1. If you
want to use another value, then on some line in the nfile put the following:

a=over_subtraction_factor e.g. a=3.5

To comment out a line in a nfile (have it be ignored), place a '#' at the
beginning of the line.

An example:

avisource("noisy_source.avi")
dfttest(f0beta=0.5,U=false,V=false,nfile="nfile.txt")

Here, dfftest is being used with default settings to filter only
the Y plane, expect for f0beta=0.5 resulting in spectral subtraction
instead of wiener filtering. nfile is listing locations of only
noise, and has the following lines:

0,0,20,40
5,0,100,380
14,0,400,100
a=5.2

The first line corresponds to frame 0, y-plane, at x,y location (40,20).
The estimate from that block will be averaged with the other two
estimates, and the over subtraction factor is set equal to 5.2.

When using a nfile, the estimated noise spectrum is output to
"noise_spectrum-date_string.txt", located in the current directory. It lists the
power of each dft coefficient (layout is the same as explained in the sfile
description). The average noise power is also calculated. As of v1.7, this file
is compatible (can be used) with the sfile parameter.

default: ""

threads -

Sets the number of threads used for processing. If set to 0, then threads
is set equal to the number of detected processors.

default: 0

opt -

Sets which cpu optimizations are used. Possible settings:

0 - auto detect
1 - c routines
2 - sse routines
3 - sse2 routines

default: 0

nstring -

Same functionality as 'nfile', but allows entering window locations directly in
the script instead of creating a separate file. The list of frame/plane/ypos/xpos
quadruples is stored as a string with each quadruple separated by a space.
Example:

If you use an nfile that looks like:

a=4.0
35,0,45,68
28,0,23,87

You can use the following nstring and get the same result:

nstring="a:4.0 35,0,45,68 28,0,23,87"

The one restriction is that the oversubtraction factor (a:x.x) must be the first
entry in the string (as opposed to nfiles where the a=x.x can be placed anywhere).
If it is not supplied, then the same default oversubtraction factor is used as
is used for the nfile option.

default: ""

sstring/ssx/ssy/sst -

Used to specify functions of sigma based on frequency. If you want sigma to vary
based on frequency, then use 'sstring' instead of the 'sigma' parameter. sstring
allows you to enter values of sigma for different normalized [0.0,1.0] frequency
locations. Values for locations between the ones you explicitly specify are computed
via linear interpolation. The frequency range, which is dependent on sbsize/tbsize,
is normalized to [0.0,1.0] with 0.0 being the lowest frequency and 1.0 being the
highest frequency. You MUST specify sigma values for those end point locations
(0.0 and 1.0)! You can specify as many other locations as you wish, and they don't
have to be in any particular order. Each frequency/sigma pair is given as "f.f:s.s".
The list of frequency/sigma pairs is saved as a string, with each pair separated by
a space.

For example, if you want a linear ramp of sigma from 1.0 for the lowest frequency
to 10.0 for the highest frequency use:

sstring = "0.0:1.0 1.0:10.0"

"0.0:1.0" => this means sigma=1.0 at frequency 0.0

"1.0:10.0" => this means sigma=10.0 at frequency 1.0

Sigma values for frequencies between 0.0 and 1.0 will be computed via
linear interpolation.

Or if you want a band-stop filter that passes low and high frequencies (filters
middle frequencies) use something like:

sstring = "0.0:0.0 0.15:10.0 0.85:10.0 1.0:0.0"

To help visualize the process, the resulting filter spectrum is output to
"filter_spectrum-date_string.txt" using the same format as the "noise_spectrum.txt"
file that is output by the nfile/nstring options. The format of this file is compatible
with 'sfile' input.

There are two methods for computing sigma values for a given frequency bin based on
sstring. The first computes the normalized frequency location of each dimension
(horizontal,vertical,temporal), interpolates sigma for each of those dimensions,
and then multiples the individual sigmas to obtain the final sigma value. So that
everything scales correctly, all sigma values entered in sstring are first raised to
the 1/#_dimensions power before perform performing linear interpolation and multiplying.
The second method (based on fft3dfilter's system) works by computing a single location
from the seperate dimension locations (x,y,z) as:

new = sqrt((x*x+y*y+z*z)/3.0)

sigma is then interpolated to this location. By default the first system is used.
To use the second system simply put a '$' sign at the beginning of sstring as shown
below:

sstring = "$ 0.0:1.0 1.0:10.0"

---------------- ssx/ssy/sst explanation -------------------------------

sstring breaks the 1D (sbsize=1), 2D (for tbsize=1), or 3D (for sbsize>1 and tbsize>1)
frequency spectrum into chunks by normalizing each dimension to [0.0,1.0]... i.e. the
frequency range [0.0,0.25] is a cube covering the first 1/4 of each dimension. This works
fine if you want to treat all dimensions the same in terms of how sigma should vary.
However, if you wanted to ramp sigma based only on temporal frequency or horizontal
frequency, this is too limited. This is where ssx/ssy/sst come in!

ssx/ssy/sst allow you to specify sigma as a function of horizontal (ssx), vertical (ssy),
and temporal (sst) frequency only. The syntax is exactly the same as that of sstring. To
get the final sigma value for a frequency location, the three separate values (one for
each dimension) are computed and then multiplied together. As with sstring the sigma values
are first raised to the 1/#_dimensions power before performing linear interpolation and
multiplying. If you don't specify all three strings, then a flat function equal to the
'sigma' parameter is used for the missing dimensions. For dimensions of size one (the
spatial dimenions if sbsize=1 or the temporal dimension for tbsize=1) the corresponding
string is ignored.

For example:

ssx="0.0:1.0 1.0:10.0",ssy="0.0:1.0 1.0:10.0",sst="0.0:1.0 1.0:10.0"

will give the same result as

sstring="0.0:1.0 1.0:10.0"

Or if you want to ramp sigma based on temporal frequency:

sigma=10.0,sst="0.0:1.0 1.0:10.0"

This will use 10.0 for the horizontal/vertical dimensions, and ramp
sigma from 1.0 to 10.0 in the temporal dimension.

If 'sstring' is specified, it takes precedence over ssx/ssy/sst. Again, the
"filter_spectrum-date_string.txt" output file is helpful in visualizing the result.

default: ""

dither -

Controls whether dithering is performed when converting from float to unsigned char
for output. Internally dfttest works on floating point values. For output the
result must be quantized back to unsigned char values. Prior to v1.8 this was always
done by simply rounding. Possible settings:

0 - no dithering (same as v1.7 and prior)
1 - Floyd-Steinberg dithering
2-100 - Floyd-Steinberg dithering with increasing amounts of uniform random
noise added prior to the dithering process

Obviously dither=0 is the fastest, and dither=1 is slightly faster than dither>=2
due to not having to generate a random number for every pixel. However, this part
doesn't take much time compared to the actual filtering operation. dither=1 should
combat any banding introduced by dfttest's quantization, but probably wont help
banding in the source. dither>=2 can combat banding in the source.

default: 0

lsb -

When set to true, dfttest outputs 16-bit pixel components by separating the most
significant bytes (MSB) and the least significant bytes (LSB). The top part of the
frame contains the MSB of all pixels and the bottom part their LSB. Therefore the
output frame height is doubled. Use this if you want to perform the dithering
later, with a separate tool.

default: false

lsb_in -

When set to true, the input is supposed to have 16-bit pixel components, of the
same format as the output given with lsb = true. The sigma scale remains relative
to the MSB, meaning that a given value will have the same visual results with
16-bit and 8-bit clips.

default: false

quiet -

Prevents dfttest to write a filter spectrum file when sigma is specified with
sstring/ssx/ssy/sst.

default: true

Changelog

   2013-08-04  v1.9.4
       + Compatible the new Avisynth 2.6 colorspaces, except Y8.

   2012-04-20  v1.9.3
       - Does no longer issue a tbsize-related error with null-length clips.

   2012-03-23  v1.9.2
       - The quiet parameter is not true by default.

   2012-03-11  v1.9.1
       - Fixed a stupid regression (from v1.8 mod16a) on the dither parameter.

   2011-11-28  v1.9
       + Added the quiet parameter to deactivate the filter spectrum output.

   2011-05-12  v1.8 mod16b
       + Added the lsb_in parameter to input 16 bit data.

   2010-06-26  v1.8 mod16a
       + Added the lsb parameter to output 16 bit data.

   2010-06-22  v1.8

       + added dither parameter and functionality
       + attach date string to filter_spectrum.txt and noise_spectrum.txt output
       + changed sstring handling and added option to function like fft3dfilter

   2010-06-21  v1.7

       + added nstring/sstring/ssx/ssy/sst parameters and functionality
       + allow space as delimiter in input files
       - fixed missing emms in sse routine for f0beta != (1.0 or 0.5) and ftype=0

   2009-06-04  v1.6

       - fixed window normalization causing tmode=0 to always result in a rectangular
            temporal window, and smode=0 to always result in a rectangular spatial
            window.
       - changed default for twin to 7

   2009-04-11  v1.5

       + added f0beta in ftype=0
       + added nfile parameter (noise power estimation)
       + normalization of sigma/sigma2/pmin/pmax based on non-coherent power gain

   2009-04-06  v1.4

       - fix threading issue that could result in corrupted output

   2009-01-27  v1.3

       + more assembly optimizations
       + tmode=1 caching (don't need to recalculate all involved temporal blocks on every frame)
       - replicate temporal dimension at beginning/end, don't mirror

   2009-01-24  v1.2

       + added filter types 3/4 and corresponding parameters (sigma2,pmin,pmax,
            sfile2,pminfile,pmaxfile)
       + more asm optimizations
       - fixed problem with global function pointers
       - changed name of 'cfile' parameter to 'sfile'
       - the value given for sigma is no longer squared on initialization
       - sigma now defaults to 2.0
       - tbsize now defaults to 5

   2007-11-22  v1.1

       + more sse optimizations
       - fixed a bug causing the bottom part of the frame to be incorrectly
            processed with some sbsize/sosize combinations

   2007-11-21  v1.0

       - initial release

Archived Downloads

Version	Download	Mirror
v1.9.4	dfttest-1.9.4.zip	dfttest-1.9.4.zip
v1.8.0	dfttestv18.zip	dfttestv18.zip

External Links

Doom9 Forum - dfttest v1.8 discussion.
Doom9 Forum - dfttest v1.9.4 update.

Back to External Filters ←

@@ Line 14: / Line 14: @@
 == Requirements ==
 *AviSynth 2.5.8 or [http://sourceforge.net/projects/avisynth2/ 2.6.0 or greater]
 *Supported color formats: [[YUY2]], [[YV12]], <span style="color:red">*</span>[[YV16]], <span style="color:red">*</span>[[YV24]]
 : <span style="color:red">*</span> These additional [[planar]] colorspaces are not available in AviSynth 2.5.8.
-<br>
 * [http://www.fftw.org/install/windows.html FFTW 3.3.4 <tt>(fftw-3.3.4-dll32.zip)</tt>]
 :<span style="color:red">***</span> 32-bit <tt>libfftw3f-3.dll</tt> needs to be in the search path (<tt>C:\Windows\SysWOW64</tt> 64-bit OS or <tt>C:\windows\system32</tt> 32-bit OS)
 :<span style="color:red">***</span> dfttest will not run or load without it.
 <br>
+== Quick start ==
+=====Denoising an 8-bit source=====
+* Default options - moderate denoising (''sigma'') with moderate temporal filtering (''tbsize''):
+:<code>dfttest(sigma=16, tbsize=5)</code>
-== [[Script variables|Syntax and Parameters]] ==
+* Light denoising with less temporal filtering:
+:<code>dfttest(sigma=6, tbsize=3)</code>
+* Light denoising with no temporal filtering:
+:<code>dfttest(sigma=6, tbsize=1)</code>
+*  ''sigma'' can be anywhere from 1.0 to 256.0 and beyond; denoising "strength" seems proportional to the square root of ''sigma''.
+* ''tbsize'' (temporal filter range) must be an odd number: 1, 3, 5, 7 ...etc
+=====Denoising a high bit depth source=====
+'''dfttest''' can accept a high bit depth ([[Stack16]]) source and return either 16bit (''lsb=true'') or 8bit (''lsb=false'').
+* Strong denoising with no temporal filtering; convert output to 8bit
+:<code>dfttest(sigma=64, tbsize=1, lsb_in=true, lsb=false)</code>
+* Same as above, but adding dither:
+:<code>dfttest(sigma=16, tbsize=3, lsb_in=true, lsb=false, dither=1)</code>
+* ''dither=1'' should combat any banding introduced by '''dfttest''''s quantization, but probably won't help banding in the source.
+* ''dither=2'' or higher adds random noise to combat banding in the source.
+<br>
+== Syntax and Parameters ==
 <pre>Syntax:

Dfttest

Revision as of 21:19, 9 September 2015

Contents

Description

Requirements

Quick start

Denoising an 8-bit source

Denoising a high bit depth source

Syntax and Parameters

Changelog

Archived Downloads

External Links

Views

Personal tools

Navigation

community

in other languages

Search

Tools